According to gb3836.1-2000 "explosion proof electrical installations for explosive gas atmospheres - Part 1: General requirements" and gb3836.2-2000 "explosion proof electrical installations for explosive gas atmospheres - Part 2: Flameproof" d ", fys35 explosion-proof wireless remote controller is classified as Exd Ⅱ BT4 and Exd Ⅱ cT4. This product can be used with HB type explosion-proof electric hoist, lxb type explosion-proof electric suspension single beam crane, LB type explosion-proof electric single beam crane, explosion-proof double beam crane, etc.
This product has 6 single speed buttons, 1 mushroom head stop, 1 rotary switch, 8 control points, with battery voltage warning device, which can cut off the circuit automatically when the voltage is insufficient. The internal functions can be set by the computer interface. The up / down, East / West, South / North can be set to inhibit each other. The standby 1 key can be set to start, accelerate, jump, normal and other functions. The control distance of this remote controller: up to 100 meters, electromagnetic interference, safety code: more than 4.3 billion factory settings, repeated use temperature: - 35 ℃ to + 80 ℃, protection grade: IP65, transmitter power supply: DC 3V, receiver power supply: AC 380V / 220V / 36V, or DC 12V / 24V, output contact capacity: 5 amperes, fully sealed relay output. Standard configuration: 1 transmitter; One receiver; The receiver is equipped with 1m connecting cable; One operation and maintenance manual. It is suitable for single hook, single speed electric hoist or hoist crane and industrial control and remote control with less than 8 contacts.
Fys35 mine explosion-proof remote control is a new generation of explosion-proof remote control developed on the basis of F21 classic remote control. It has passed the exibibt4 intrinsic safety certification of relevant national departments, and obtained the national coal underground use license. It can work safely in the bad chemical coal mines and other flammable and explosive dangerous occasions.
FYs and fyf335 mining remote controller (hereinafter referred to as industrial remote controller) are used in the environment of methane and coal dust explosion. They can send wireless carrier signal and operate the panel switch of remote controller to start the transmitting function. When they are not in operation, the remote controller is in standby mode. The shell of remote controller is made of Q235A. The mechanism is reasonable and the explosion releasing performance is durable.
| Technical parameters of flameproof industrial remote controller |
| model | FYS35/FYF35 | Explosion proof grade | ExibIICT6 |
| Carrier operating frequency | L433MHZ | Rated working voltage | DC7.2伏(6节1.2伏) |
| Radio impedance | 50Ω | Maximum working current | £110MA |
| Field strength power | -30DbBm～10bBm | Remote control distance | >35m |
| humidity | 15°～40° | Average relative humidity | 45～75%RH |
| Explosion proof sign of receiver | FYS 35 EXdIBI (Mb) | Certificate number | 320140687 |
| Transmitter explosion proof sign | YFY35 EXIBI (Mb) | Certificate number | 320140713 |
|
|
Fys35 mine flameproof and intrinsically safe remote control, mine remote control, mine explosion-proof button switch Images
|
